Faucets also need daily maintenance!

The faucet is generally a tool for cleaning dishes and chopsticks in the kitchen. Similarly, as one of the cleaning tools, the faucet also needs to be "cleaned". And the cleaning here refers to maintenance, like the faucet in many people's homes will appear broken. Therefore, maintenance can improve the durability of the product, and at the same time it is more hygienic.

How to maintain the faucet? In fact, there is also knowledge in this:
1. Replace the faucet regularly. Nowadays, chlorine is often used as a disinfectant in tap water, and the residual chlorine compounds in the water will aggravate the precipitation of lead in the tap. Generally speaking, if the copper alloy faucet is used for more than five years, the amount of lead precipitation will greatly increase.
2. In order to protect the coating of the faucet, use a wrung soft cotton cloth to wipe when cleaning. Do not wipe directly with a wet towel to avoid leaving scale, and do not wipe with burrs to damage the coating. Avoid letting the faucet come into contact with acid-base liquids. You can spray a neutral detergent on a soft cloth and then gently wipe the faucet.
If after a period of use, the water output is found to decrease, or even the water heater is turned off, it may be that the screen is blocked by water and sand. At this time, gently unscrew the screen cover at the water outlet of the faucet to remove impurities. Generally speaking, cleaning the impurities of the screen regularly, once every three months at the longest, is better for the water quality and the health of the family.
Experts suggest that when you turn on the faucet every morning, you can leave it empty for a while, and fill the water for flushing the bathroom and mopping the floor. Because the water when the faucet is just opened often contains more harmful substances, such as more lead. In the same way, a faucet that has not been turned on for a long time cannot be used for drinking immediately.
The gold-plated part of the gold-plated product is very easy to fall off and lose its luster, and protein can be used to maintain the luster of the plating. Beat the egg whites with a whisk until slightly bubbling, then wash the faucet with warm water and wipe it dry, then dip a little egg whites and gently wipe on the gold-plated part to protect the gloss of the coating.
Only by daily maintenance of the faucet can the service life of the faucet be guaranteed. I believe everyone will have a clear understanding of how to maintain it after reading it.

Relevant News

Urinal induction water flush brings great convenience to our life

Urinal induction water flush manufacturers tell you that with the development of technology, intelligence is becoming more and more popular in life, and sanitary ware is also popular in the use of intelligent induction.

Introduction to the main features of Urinal induction water flush

Only within the sensing range, Urinal induction water flush will perform automatic flushing, otherwise it will not flush. The flushing program, flushing time and sensing distance can be adjusted. It is a relatively advanced intelligent water-saving product in China.

What should I do if the Sensor toilet flushometer does not water

Most of them are used in public places. For the convenience of cleaning, the toilets are odorless and clean. Many public toilets are equipped with Sensor toilet flushometers, but what should I do if the Sensor toilet flushometers do not run out of water?

The structure of Sensor toilet flushometer

Sensor toilet flushometer tells you that with the improvement of people's living standards and the wide application of artificial intelligence, many sensing devices have appeared, which also provides convenience for our lives and improves our quality of life.

Sensor urinal flushometer pre-embedded method

Buy the Sensor urinal flushometer, then disassemble it, check the instruction manual, and mark the installation according to the instructions. After deciding the installation location, use an electric drill on the wall to drill holes of a certain depth and diameter, and then lock them with screws.

Sensor urinal flushometer manufacturers take you to understand the size of the urinal sewer from the wall

The manufacturer of Sensor urinal flushometer said that many people do not know much about the size of the urinal downpipe from the wall. In fact, the urinal downpipe is about 15 cm from the wall and 32.5 cm.