The structure of Sensor toilet flushometer
Sensor toilet flushometer tells you that with the improvement of people's living standards and the wide application of artificial intelligence, many sensing devices have appeared, which also provides convenience for our lives and improves our quality of life. Let's take a look The structure of Sensor toilet flushometer.
Sensor toilet flushometer refers to a new type of sensor flushing valve, which includes a body, a fixed seat located at the lower part of the body, a valve disc set on the fixed seat, a solenoid valve set on the valve disc, a sending, receiving device.
Sensor toilet flushometer tells you that there is a water outlet at the lower end of the valve disc, a protruding cylinder is arranged at the water outlet in the valve disc, the upper end of the cylinder is a water level port, and there is a sealing port beside the water level port. , There is a pressure relief drainage hole next to the sealing port, the pressure relief drainage hole is connected with the water outlet, the lower side of the valve disc is provided with a water inlet, the water inlet is located on one side of the cylinder, and there is an annular groove and a valve disc under the fixed seat. The water inlet of the main body is matched with the water outlet of the valve disc.
The above content is some related introduction to the structure of Sensor toilet flushometer. More interested friends can search online to learn more.
Urinal induction water flush manufacturers tell you that with the development of technology, intelligence is becoming more and more popular in life, and sanitary ware is also popular in the use of intelligent induction.
Only within the sensing range, Urinal induction water flush will perform automatic flushing, otherwise it will not flush. The flushing program, flushing time and sensing distance can be adjusted. It is a relatively advanced intelligent water-saving product in China.
Most of them are used in public places. For the convenience of cleaning, the toilets are odorless and clean. Many public toilets are equipped with Sensor toilet flushometers, but what should I do if the Sensor toilet flushometers do not run out of water?
Buy the Sensor urinal flushometer, then disassemble it, check the instruction manual, and mark the installation according to the instructions. After deciding the installation location, use an electric drill on the wall to drill holes of a certain depth and diameter, and then lock them with screws.
The manufacturer of Sensor urinal flushometer said that many people do not know much about the size of the urinal downpipe from the wall. In fact, the urinal downpipe is about 15 cm from the wall and 32.5 cm.
The Warm from Wood feeling for a better natural bathroom, Located in Kelapa Gading Area, Jakarta, our clients, who fall in loves with wood finally came out with the final design for their masterbathroom, luckily all the good from wood and add all the warm may fulfil their bathroom! Thank you for trusting us!