What should I do if the Sensor toilet flushometer does not water

Most of them are used in public places. For the convenience of cleaning, the toilets are odorless and clean. Many public toilets are equipped with Sensor toilet flushometers, but what should I do if the Sensor toilet flushometers do not run out of water? How to repair it? This is another problem, let me take you to see how to solve this problem.

1. The sensor is dirty
If the sensor toilet flushometer does not water, it may be that the sensor of the squatting toilet is dirty, and it does not feel that it needs to be flushed. In this case, the cleaning staff can clean it up and it can be used normally.
2. Too far from the sensor
The sensor toilet flushometer does not produce water. It may be that you are too far from the sensor when you are squatting, and the sensor cannot sense it. You can lean back a little, so that you can sense the flush.
3. Water cut off
If the sensor toilet flushometer does not run out of water, it may be due to a water cutoff. There is no other way but to wait for the water supply again, and then the water will come.
4. Low battery
 If the sensor toilet flushometer does not produce water, it may be that the battery is out of power. If the sensor is powered by the battery, you need to replace the battery in time and re-power.
5. There is a problem with the line
If the sensor toilet flushometer does not water, there may be a problem with the power supply line, which requires specialized maintenance personnel to repair.
6. The sensor is broken
The sensor toilet flushometer may be used for a long time, the sensor is aging, and the problem is broken, which requires a new sensor.
This is what I am looking for for everyone. How to do and maintain the Sensor toilet flushometer without water. I hope it can help you in daily life.

Relevant News

Urinal induction water flush brings great convenience to our life

Urinal induction water flush manufacturers tell you that with the development of technology, intelligence is becoming more and more popular in life, and sanitary ware is also popular in the use of intelligent induction.

Introduction to the main features of Urinal induction water flush

Only within the sensing range, Urinal induction water flush will perform automatic flushing, otherwise it will not flush. The flushing program, flushing time and sensing distance can be adjusted. It is a relatively advanced intelligent water-saving product in China.

The structure of Sensor toilet flushometer

Sensor toilet flushometer tells you that with the improvement of people's living standards and the wide application of artificial intelligence, many sensing devices have appeared, which also provides convenience for our lives and improves our quality of life.

Sensor urinal flushometer pre-embedded method

Buy the Sensor urinal flushometer, then disassemble it, check the instruction manual, and mark the installation according to the instructions. After deciding the installation location, use an electric drill on the wall to drill holes of a certain depth and diameter, and then lock them with screws.

Sensor urinal flushometer manufacturers take you to understand the size of the urinal sewer from the wall

The manufacturer of Sensor urinal flushometer said that many people do not know much about the size of the urinal downpipe from the wall. In fact, the urinal downpipe is about 15 cm from the wall and 32.5 cm.

Master Bathroom Design

The Warm from Wood feeling for a better natural bathroom, Located in Kelapa Gading Area, Jakarta, our clients, who fall in loves with wood finally came out with the final design for their masterbathroom, luckily all the good from wood and add all the warm may fulfil their bathroom! Thank you for trusting us!